Installing a Brick Paver Walkway or Hanger Bricks

The usage of Installing a Brick Paver Walkway or Decorative Bricks or Pavers to create a sidewalk or outdoor patio complements a home in a manner in which is unequaled. It includes a level of quality and sophistication to a house entryway that can not be accomplished with either concrete or asphalt. Brick and Pavers likewise come in several colors and shapes permitting special color pattern and patterns to be achieved. In addition, installing a Brick or Paver walkway does not always need a pro. With some basic knowledge and a fairly basic walkway plan, a house owner can carrying out such a project.

The key to setting up a Brick or Paver Walkway is to very first properly prepare the area where the bricks/pavers are to be set up. The area must be dug out at least a foot down, getting rid of all topsoil and clay soil. In addition, string lines should be strung on each side of the pathway. The string lines indicate the finished height of the walkway.
When the area has actually been dug, 3/4" gravel stone must be laid in and tamped down firmly. 2" of sand, or stone dust should be spread over the gravel. Once again the sand/stone dust should be tamped down. Stone dust is preferred. The height between the tamped down sand and the stringline should equate to the thickness of the brick or paver.

Now that you have a steady base, position a 1" pipe or ledger board the length of the walkway on either side of the pathway. Then utilizing a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will create a level area to lay the bricks/pavers.

Now place on the level sand/stone dust strips of plastic brick borders. Set up a run on both sides of the ready location. These strips will act as your pathway border and aid to maintain the stability and shape of the pathway.

The secret to laying the bricks/pavers is to ensure that they interlock with each other. Constantly stagger surrounding rows of bricks by 1/2 of a brick to interlock them. This will again help preserve the integrity of the sidewalk.

When building the walkway, undoubtedly bricks/pavers will need to be cut or divided. Unless you desire refractory fire brick to buy or rent a costly wetsaw, I would recommend buying an easy brick/paver splitter. It is basically a sculpt with a wide end that is the width of the bricks/pavers. To in fact cut/split the brick/paver, lay it in a bed of sand and place the chisel at a 75 degree angle over the area where you desire to break the brick. Using a hammer strike the butt end of the chisel strongly. You may require to do this a couple of times. You may likewise want to flip the brick/paver over and strike the opposite of the brick utilizing the hammer and chisle. Within a couple of strikes the brick/paver should break easily. , if your walkway has curves you will need to buy/rent a wetsaw.

.

After installing the bricks, build up the outdoors edges with extra sand, and then shovel in the topsoil and load down firmly.
Spread stone dust over the brand-new walkway and more info sweep into the fractures. This will complete the interlocking of the bricks and assist to eliminate any weed growth.


In addition, installing a Brick or Paver sidewalk does not always need a pro. The secret to installing a Brick or Paver Walkway is to very first effectively prepare the area where the bricks/pavers are to be set up. Now that you have a steady base, position a 1" pipe or journal board the length of the pathway on either side of the sidewalk. These strips will act as your sidewalk border and aid to keep the integrity and shape of the walkway. Undoubtedly bricks/pavers will need to be cut or divided when building the walkway.

Leave a Reply

Your email address will not be published. Required fields are marked *